Cable modem and Wi-Fi router beside an Ethernet cable

A speed-test result below your internet plan does not automatically mean you need new equipment. The fastest way to find the cause is to compare a wired result with Wi-Fi, test at the right time, and work outward from the modem.

Quick answer

When internet speed is slower than your plan, test one computer by Ethernet directly through the router, restart the modem and router in order, and compare several tests at different times. If wired results are also slow, the issue is more likely with the modem, provider signal, or service plan than with Wi-Fi.

Start with a fair speed test

Use one recent computer, pause large downloads and cloud backups, and test close to the router. Run the test two or three times rather than relying on one result. Compare the download and upload results with the speeds your plan actually advertises; many plans use an “up to” download figure, and upload speed may be much lower by design.

Compare Ethernet with Wi-Fi

This is the most useful dividing line. Connect a computer to the router with Ethernet, temporarily turn off its Wi-Fi, and run the same test. A quality Cat 6 Ethernet cable is inexpensive and helps separate a wireless-coverage problem from an incoming-service problem.

  • Wired is close to the plan, Wi-Fi is slow: focus on router placement, interference, device capability, and the Wi-Fi band.
  • Both wired and Wi-Fi are slow: restart the network, inspect modem lights, and check for a provider outage or signal issue.
  • Only one device is slow: update, restart, or reconnect that device before changing network hardware.
Wi-Fi router connected to a laptop by Ethernet for a home speed test

Restart the modem and router correctly

Unplug both devices. Power the modem back on first and wait until its online light is steady; this can take several minutes. Then power on the router and allow devices to reconnect. Restarting in this order lets the router request a fresh connection from the modem instead of preserving an old or incomplete one.

Rule out common Wi-Fi bottlenecks

For Wi-Fi testing, move into the same room as the router and try a newer phone or computer. Use 5 GHz or 6 GHz when your device and router support it for higher nearby speeds; use 2.4 GHz when distance and wall penetration matter more. Keep the router out of cabinets and away from dense metal, microwave ovens, and other radio equipment.

Check equipment and plan limits

An older modem may not support the speed tier you now pay for, and an older router can limit wired or wireless throughput. Check the modem model against your provider’s approved list and verify the Ethernet port speeds on the modem, router, and computer. Do not replace gear merely because a single Wi-Fi test is low; first establish whether Ethernet can reach the expected speed.

If coverage is the remaining problem, compare current Wi-Fi router and mesh options based on your home size, number of devices, and ongoing firmware support.

When to contact the provider

Contact the provider when a directly wired test remains consistently below the plan after a modem and router restart, especially if the modem shows an unusual online, downstream, or upstream light. Ask whether there is an outage, whether the modem is provisioned for the correct tier, and whether the line signal needs testing. Record the time, test result, and wired setup so the support team has useful information.

Frequently asked questions

Why is my Wi-Fi slower than my internet plan?

Your plan describes the service reaching your home, while Wi-Fi speed also depends on distance, walls, interference, router capability, and the device itself. A wired comparison reveals whether Wi-Fi is the limiting step.

Does a new router increase internet speed?

A new router can improve Wi-Fi range, capacity, and local wireless performance, but it cannot increase the speed delivered by your provider plan or repair a line issue.

Should I test at night or during the day?

Test at more than one time. Evening slowdowns can point to neighborhood congestion, while consistently slow wired results at all times suggest a different issue.

Our hope

We hope this gives you a clear way to test the connection before spending money. One wired comparison and a few repeat tests can make the next step much more obvious.

As an Amazon Associate, All About Home Electronics earns from qualifying purchases.